Manual Transaxle

REPLACEMENT






COMPONENTS

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE





3. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (A/T TRANSAXLE)
a) Remove the 3 nuts and transverse engine engine mounting insulator.
4. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (M/T TRANSAXLE)
a) Remove the 3 nuts and transverse engine engine mounting insulator.
b) Remove the 4 bolts and bracket from the manual transmission.

5. REMOVE FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH





a) Remove the 2 bolts on the front side of the front suspension arm sub-assy lower No. 1 LH.





b) Remove the bolt and nut on the rear side of the front suspension arm sub-assy lower No. 1 LH.
c) Remove the front suspension arm sub-assy lower No. 1 LH.
d) Remove the front lower arm bush stopper from the front suspension arm sub-assy lower No. 1 LH.
6. INSTALL FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
a) Install the front lower arm bush stopper to the front suspension arm sub-assy lower No. 1 LH.





b) Install the front suspension arm sub-assy lower No. 1 LH with the 2 bolts to the front side.
Torque: 200 Nm (2,039 kgf-cm, 148 ft. lbs.)





c) Install the front suspension arm sub-assy lower No. 1 LH with the bolt and nut to the rear side.
Torque: 206 Nm (2,101 kgf-cm, 152 ft. lbs.)





7. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (M/T TRANSAXLE)
a) Install the transverse engine engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft. lbs.)
8. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (M/T TRANSAXLE)
a) Install the bracket with the 4 bolts to the manual transmission.
Torque: 64 Nm (653 kgf-cm, 47 ft. lbs.)
b) Install the transverse engine engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft. lbs.)
9. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (2AZ-FE ENGINE TYPE)
10. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (1MZ-FE ENGINE TYPE)