Inspections

ON-VEHICLE INSPECTION

1. FUNCTION CHECK
a. Check that the key reminder warning buzzer will sound.
1. With the driver's door close, insert the key into the ignition switch lock cylinder, and then turn the key to the LOCK or ACC.
2. Then, check that the buzzer will sound intermittently if the driver's door is opened.

b. Check that the key reminder warning buzzer will stop.
1. Check that the buzzer will stop if any of the following operations is done while the buzzer is sounding.
2. Close the driver's door (front door courtesy lamp switch assembly is off).
3. Turn the ignition switch ON.
4. Pull out the key from the ignition switch lock cylinder.

2. INSPECT MULTIPLEX BODY COMPUTER ASSY
a. Inspect the body ECU.
1. Disconnect the body ECU connector A.







2. Inspect the voltage of each terminal of the vehicle's side connector.

HINT: If the value is not as specified, there may be a malfunction in the vehicle's side.




3. Connect the connector.

HINT: If the value is not as specified, there may be a malfunction in the vehicle's side.

3. INSPECT INSTRUMENT PANEL JUNCTION BLOCK ASSY
a. Inspect the body ECU.
1. Disconnect the instrument panel junction block assembly connectors D, G, H and J.







2. Inspect the voltage of each terminal of the vehicle's side connector.

HINT: If the value is not as specified, there may be a malfunction in the vehicle's side.