Yaw Rate Sensor: Service and Repair

REPLACEMENT

NOTICE: Do not separate the sensor from the bracket.

1. REMOVE RR CONSOLE BOX





2. REMOVE YAWRATE SENSOR
a. Disconnect the yawrate sensor connector.
b. Remove the 2 bolts and yawrate sensor.





3. INSTALL YAWRATE SENSOR
a. Install the yawrate sensor with the 2 bolts.
Torque: 12.5 Nm (127 kgf-cm, 9 ft. lbs.)
b. Connect the yawrate sensor connector.
4. INSTALL RR CONSOLE BOX
5. PERFORM YAWRATE SENSOR ZERO POINT CALIBRATION