Pinout Values and Diagnostic Parameters

Terminals Of ECU - Connector View:

Teminals Of ECU - Pinouts:

1. CHECK DRIVER SIDE J/B
a. Disconnect the J/B connectors 2A, 2D, 2G, 2H, 2K.
b. Check the voltage and continuity of each terminal of the vehicle's side connectors.

HINT: If the value is not as specified the vehicle's side may be defective. In this case, inspect the harness, connector and fuse between the ECU and battery, then repair or replace it as necessary.

2. CHECK THEFT DETERRENT ECU (SECURITY ECU)
a. Disconnect the theft deterrent ECU connector T5.




b. Check the voltage and continuity of each terminal of the vehicle's side connectors.
Standard:

HINT: If the value is not as specified the vehicle's side may be defective. In this case, inspect the harness, connector and fuse between the ECU and battery, then repair or replace it as necessary.