Seals and Gaskets: Service and Repair

ON-VEHICLE REPAIR
1. REMOVE FRONT DRIVE SHAFT. Refer to Steering and Suspension.





2. REMOVE SIDE GEAR SHAFT OIL SEAL
Using SST, pull out the oil seal.
SST 09308-00010





3. INSTALL LH AND RH SIDE GEAR SHAFT OIL SEAL
a. Using SST and a hammer, drive in a new oil seal.
SST 09223-00010
Oil seal depth: 4.3 ± 0.5 mm (0.169 ± 0.02 inch)
b. Coat the lip of the oil seal with MP grease.
4. INSTALL FRONT DRIVE SHAFT
5. CHECK ATF LEVEL