Without Scan Tool

Check the DTC.




1. Using SST, connect terminals Tc and CG of DLC3.
SST 09843-18040
2. Turn the ignition switch ON.
3. Read the DTC from the ABS warning light on the combination meter.






HINT:
- If no code appears, inspect the diagnostic circuit or ABS warning light circuit.
- As an example, the blinking patterns for normal code and codes 11 are shown on the left.

4. Codes are explained in the code table .
5. After completing the check, disconnect terminals Tc and CG, and turn off the ignition switch.
Even if 2 or more malfunctions are detected, the lowest numbered DTC will be displayed.