Front Seat
DISASSEMBLY1. REMOVE HEADREST
2. REMOVE RECLINING RELEASE HANDLE
3. REMOVE SEAT CUSHION SHIELD
Remove the 2 screws and seat cushion shield as shown in the illustration.
HINT: Remove the seat cushion shield in order A, B as shown in the illustration.
4. REMOVE FRONT SEAT INNER BELT
Remove the bolt and front seat inner belt.
Torque: 41 N.m (420 kgf.cm, 30 ft.lbf)
5. REMOVE SEAT CUSHION INNER SHIELD
Remove the clip, screw and seat cushion inner shield.
6. REMOVE SEATBACK ASSEMBLY
a. w/ Side airbag:
Disconnect and disengage the connector and wire harness.
NOTE: Be careful not to damage the connector and wire harness.
b. Remove the hog rings.
HINT: At the time of reassembly, please refer to following item.
When installing hog rings, take care to prevent wrinkles as little as possible.
c. Remove the 4 bolts and seatback assembly.
Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)
7. REMOVE SEATBACK PAD WITH COVER
a. Remove the headrest supports.
b. Remove the seatback pad with cover from the seatback frame.
8. REMOVE SEAT CUSHION PAD WITH COVER
a. Remove the hog rings.
HINT: At the time of reassembly, please refer to following item.
When installing hog rings, take care to prevent wrinkles as little as possible.
b. Disengage the seat cushion cover hooks and remove the seat cushion cover with pad from the seat cushion frame.
9. REMOVE RECLINING ADJUSTER INSIDE COVERS
Remove the 2 screws and 2 reclining adjuster inside covers.
10. REMOVE SEAT TRACK HANDLE
REASSEMBLY
Reassembly is in the reverse order of disassembly.