ABS Diagnosis System

DIAGNOSIS SYSTEM




Check the indicator

When the ignition switch is turned ON, check that the ABS warning light goes on for a few seconds.

HINT: If the indicator check result is not normal, proceed to troubleshooting for the ABS warning light circuit.






Using TOYOTA hand-held tester, check the DTC.
1. Hook up the TOYOTA hand-held tester to the DLC2.
2. Turn the ignition switch ON.
3. Read the DTC by following the prompts on the tester screen.

HINT: Please refer to the TOYOTA hand-held tester operator's manual for further details.