Removal and Installation

COMPONENTS

1. REMOVE THESE PARTS
a. Remove Front Door Scuff Plate RH
b. Remove Cowl Side Trim RH
c. Remove No. 2 Under Cover
d. Remove Lower No. 2 Finish Panel
e. Remove Glove Compartment Door
f. Remove Glove Compartment
g. Remove ECM




2. REMOVE BLOWER UNIT
a. Remove the 2 connector bracket set screws.
b. Disconnect the connectors.
c. Remove the 2 nuts, 2 bolts and blower unit.

INSTALLATION
Installation is in the reverse order of removal.