Front Wiper and Washer

With the ignition SW turned ON, the current flows to TERMINAL 17 of the front wiper and washer SW, TERMINAL 2 of the washer motor and TERMINAL 6 of the front wiper motor through the WIPER fuse.

1. LOW SPEED POSITION
With the front wiper and washer SW turned to LOW position, the current flows from TERMINAL 17 of the front wiper and washer SW to TERMINAL 7 to TERMINAL 3 of the front wiper motor to TERMINAL 1 to GROUND and causes to the wiper motor to run at low speed.

2. HIGH SPEED POSITION
With the front wiper and washer SW turned to HIGH position, the current flows from TERMINAL 17 of the front wiper and washer SW to TERMINAL 8 to TERMINAL 2 of the front wiper motor to TERMINAL 1 to GROUND and causes to the wiper motor to run at high speed.

3. INT POSITION
With the front wiper and washer SW turned to INT position the relay operates and the current which is connected by relay function flows from TERMINAL 17 of the front wiper and washer SW to TERMINAL 2 to GROUND. This flows of current operates the intermittent circuit and the current flows from TERMINAL 17 of the front wiper and washer SW to TERMINAL 7 to TERMINAL 3 of the front wiper motor to TERMINAL 1 to GROUND and functions.

The intermittent operation is controlled by a condenser's charged and discharged function installed in relay and intermittent time is controlled by a time control SW to charge the charging time of the condenser.

4. MIST POSITION
With the front wiper and washer SW turned to MIST position, the current flows from TERMINAL 17 of the front wiper and washer SW to TERMINAL 7 to TERMINAL 3 of the front wiper motor to TERMINAL 1 to GROUND and causes the wiper motor to run at low speed.

5. WASHER CONTINUOUS OPERATION
With the washer SW turned to ON, the current flows from TERMINAL 2of the washer motor to TERMINAL 1 to TERMINAL 11 of the front wiper and washer SW to TERMINAL 2 to GROUND and causes to the washer motor to run, and window washer is jet. This causes the current to flow washer continuous operation circuit in TERMINAL 17 of the front wiper and washer SW to TERMINAL 7 to TERMINAL 3 of the front wiper motor to TERMINAL 1 to GROUND and function.