Front

REMOVAL





1. Disconnect connector.
a. Remove the front fender splash shield.
b. Disconnect the speed sensor connector.
2. Remove speed sensor.
a. Remove the 3 clamp bolts holding the sensor harness to the body and upper suspension arm.

Torque: 5.4 Nm (48 inch lbs.)





b. Remove the speed sensor from the steering knuckle.

Torque: 7.8 Nm (69 inch lbs.)

c. Remove the O-ring from the speed sensor.

INSTALLATION
Installation is in the reverse order of removal. After installation, check speed sensor signal.