Daytime Running Lamp Relay: Testing and Inspection

Terminal Identification:

CANADA models only:
INSPECT D.R.L. MAIN RELAY CIRCUIT
Disconnect the connector from relay and inspect the connector on wire harness side, as shown.
If the circuit is as specified, try replacing the relay with a new one.
If the circuit is not as specified, inspect the circuit connected to other parts.







INSPECT D.R.L. NO.2 RELAY CONTINUITY
If continuity is not as specified, replace the relay

Terminal Identification:

INSPECT D.R.L. NO.3 RELAY CONTINUITY
If continuity is not as specified, replace the relay.