Ignition Coil: Service and Repair

REMOVAL

1. REMOVE NO.3 TIMING BELT COVER
2. REMOVE PCV HOSES
3. DISCONNECT IGNITION COIL CONNECTORS





4. REMOVE BRACKET AND IGNITION COILS ASSEMBLIES
Remove the 2 bolts and 2 ignition coils assembly.

Torque: 9.0 N.m (90 kgf.cm, 80 in. lbf)

5. REMOVE IGNITION COILS FROM BRACKET
(a) Remove the rubber boot from the ignition coil.





(b) Remove the 2 screws and ignition coil.

INSTALLATION

Installation is in the reverse order of removal.