Fuel Pump Disassembly and Assembly

DISASSEMBLY

1. REMOVE FUEL SENDER GAUGE FROM FUEL PUMP BRACKET
(a) Disconnect the connector from the fuel pump bracket.





(b) Remove the 2 screws and sender gauge.
2. REMOVE FUEL PUMP FROM PUMP BRACKET





(a) Remove the lead wire.





(b) Pull out the lower side of the fuel pump from the pump bracket.
(c) Remove the rubber cushion from the fuel pump.
(d) Disconnect the fuel hose from the fuel pump, and remove the fuel pump.

3. REMOVE FUEL PUMP FILTER FROM FUEL PUMP





(a) Using a small screwdriver, remove the clip.

HINT: At the time of installation,please refer to the following items. Use a new clip.

(b) Pull out the pump filter.

REASSEMBLY

Assembly is in the reverse order of disassembly