Camshaft Position Sensor: Service and Repair

REMOVAL

1. DISCONNECT IAC VALVE CONNECTOR
2. DISCONNECT AIR HOSE FROM IAC VALVE
3. REMOVE ENGINE HANGER
Remove the 2 bolts, ground strap and engine hanger.

Torque: 40 N.m (400 kgf.cm, 30 ft.lbf)

4. DISCONNECT CAMSHAFT POSITION SENSOR CONNECTORS





5. REMOVE CAMSHAFT POSITION SENSORS
Remove the 4 bolts, 2 camshaft position sensors and 2 gaskets.

Torque: 9.0 N.m (90 kgf.cm, 80 in. lbf)

INSTALLATION

Installation is in the reverse order of removal.