EGR Valve: Service and Repair

REMOVAL





1. REMOVE EGR PIPE
Remove the 4 nuts. EGR pipe and 2 gaskets.

HINT: At the time of installation, please refer to the following items. Install 2 new gaskets.

Torque: 12 N.m (120 kgf.cm, 9 ft.lbf)

2. DISCONNECT EGR GAS TEMPERATURE SENSOR CONNECTOR AND CLAMP

3. REMOVE EGR VALVE





(a) Disconnect these hoses and connectors:
(1) EVAP hose from EGR valve hook
(2) Vacuum hose from EGR valve
(3) EGR valve position sensor connector
(b) Remove the 3 nuts, EGR valve and gasket.

HINT: At the time of installation, please refer to the following items. Install a new gasket.

4. REMOVE EGR GAS TEMPERATURE SENSOR

INSTALLATION

1. REINSTALL EGR GAS TEMPERATURE SENSOR

Torque: 20 N.m (200 kgf-cm, 14 ft-lbf)

2. REINSTALL EGR VALVE

Torque: 12 N.m (120 kgf-cm 9 ft-lbf)