Output Shaft, M/T

SERVICE SPECIFICATIONS
Flange Thickness
Shaft 5.60 mm (0.2205 inch)
1st Gear Inner Race 4.78 mm (0.1881 inch)
Journal Diameter (Minimum):
Counter Gear Bearing 29.950 mm (1.1791 inch)
Counter 5th Gear Bearing 26.975 mm (1.0620 inch)
2nd Gear 42.975 mm (1.6919 inch)
3rd Gear 31.969 mm (1.2586 inch)
Thrust Clearance:
Counter 5th Gear:
Standard 0.10-0.41 mm (0.0039-0.0161 inch)
Maximum 0.46 mm (0.0181 inch)
1st, 2nd and 3rd Gear:
Standard 0.10-0.25 mm (0.0039-0.0098 inch)
Maximum 0.30 mm (0.0118 inch)
Radial Clearance:
1st, 2nd and 5th Counter Gears:
Standard 0.009-0.060 mm (0.0004-0.0024 inch)
Maximum 0.150 mm (0.0059 inch)
3rd Gear:
Standard 0.015-0.066 mm (0.0006-0.0026 inch)
Maximum 0.200 mm (0.0079 inch)
Runout 0.06 mm (0.0024 inch)