Transmission Case and Extension Housing
TRANSMISSION CASETransmission Case Inspection
INSPECT TRANSMISSION CASE BUSHING
Using a cylinder gauge, measure the inside diameter of the transmission case rear bushing.
Maximum inside diameter: 38.19 mm (1.5035 inch)
If the inside diameter is greater than the maximum, replace the transmission case.
EXTENSION HOUSING
Extension Housing Inspection
INSPECT EXTENSION HOUSING BUSHING
Using a cylinder gauge, measure the inside diameter of the extension housing bushing.
Maximum inside diameter: 40.09 mm (1.5783 inch)
If the inside diameter is greater than the maximum, replace the extension housing.