Front

Front Speed Sensor Components:

REMOVAL

Disconnecting Speed Sensor Connector:

1. Disconnect Speed Sensor connector.
(a) Remove the front fender splash shield.
(b) Disconnect the Speed Sensor connector.
2. Remove Speed Sensor.
(a) Remove the 3 clamp bolts holding the sensor harness to the body and upper suspension arm.
(b) Remove the Speed Sensor from the Steering Knuckle.

Removing 0-Ring From Speed Sensor:

(c) Remove the O-ring from the Speed Sensor.

INSTALLATION
Reverse removal procedure to install, noting the following:
- Torque clamp bolts to 5.4 Nm (48 inch lbs.)
- Torque sensor to steering knuckle bolts to 7.8 Nm (69 inch lbs.)
- After installation, check Speed Sensor signal.