Connecting Rod

DIMENSIONS
Clearance:
Thrust:
STD 0.15 - 0.25 mm (0.0059 - 0.0098 inch)
Maximum 0.30 mm (0.0118 inch)
Oil:
Standard 0.020 - 0.048 mm (0.0008 - 0.0019 inch)
U/S 0.25 0.019 - 0.058 mm (0.0007 - 0.0022 inch)
Maximum 0.08 mm (0.0031 inch)

Diameter:
Bolt Outside:
Standard 8.860 - 9.000 mm (0.3488 - 0.3543 inch)
Minimum 8.60 mm (0.3386 inch)

Rod:
Maximum Per 100 mm (3.94 inch):
Out-Of-Alignment 0.05 mm (0.0020 inch)
Twist 0.05 mm (0.0020 inch)

Thickness:
Bearing Center Wall:
Standard:
Mark 1 1.486 - 1.490 mm (0.0585 - 0.0587 inch)
Mark 2 1.490 - 1.494 mm (0.0587 - 0.0588 inch)
Mark 3 1.494 - 1.498 mm (0.0588 - 0.0590 inch)

TIGHTENING SPECIFICATIONS
Rod Cap To Connecting Rod
1st Pass 29 Nm (22 ft. lbs.)
2nd Pass Turn Additional 90°