Catalytic Converter: Service and Repair

TWC REPLACEMENT

1. REMOVE TWC
(a) Jack up the vehicle.
(b) Check that the converter is cool.





(c) Remove the 4 bolts, support bracket and 2 nuts at the front and rear of the converter.
(d) Remove the converter and 2 gaskets.
2. REINSTALL CONVERTER
(a) Install the converter and 2 new gaskets with the 4 bolts, 2 nuts and support bracket.
(b) Tighten the bolts and nuts.

Torque: 43 N.m (440 kgf.cm. 32 ft.lbf)