Combination Switch: Testing and Inspection

1. INSPECT LIGHT CONTROL SWITCH CONTINUITY
If continuity is not as specified. replace the switch.










2. INSPECT DIMMER SWITCH CONTINUITY
If continuity is not as specified, replace the switch.










3. INSPECT TURN SIGNAL SWITCH CONTINUITY
If continuity is not as specified, replace the switch.










4. INSPECT FRONT FOG LIGHT SWITCH CONTINUITY
If continuity is not as specified, replace the switch.










5. INSPECT TURN SIGNAL SWITCH CONTINUITY
If continuity is not as specified, replace the switch.

Reference:

6. INSPECT HAZARD WARNING SWITCH CONTINUITY
If continuity is not as specified, replace the switch.










7. INSPECT FRONT [1][2]WIPER AND WASHER SWITCH CONTINUITY
If continuity is not as specified, replace the switch.










8. INSPECT REAR [1][2]WIPER AND WASHER SWITCH CONTINUITY
If continuity is not as specified, replace the switch.