Rear

Rear Speed Sensor Components:

REMOVAL
1. Disconnect the Speed Sensor connector.
(a) Liftback: Remove the rear seat back and deck trim side panel.
Coupe: Remove the luggage compartment trim cover.

Disconnect Speed Sensor Connector:

(b) Disconnect the Speed Sensor connector, and pull out the sensor wire harness with the grommet.

Remove Clamp Bolts:

(c) Remove the 2 clamp bolts holding the sensor wire harness to the body and suspension Shock Absorber.
Torque: 5 Nm (44 inch lbs.)
2. Remove Speed Sensor.

Remove Speed Sensor:

Remove the Speed Sensor from the Axle Carrier.
Torque: 8 Nm (71 inch lbs.)

NOTE: Make sure that:
^ There are no foreign objects on the sensor or the part of the knuckle to which the sensor is to be installed.
^ The sensor is installed flat against the knuckle when you tighten the bolt.

INSTALLATION
Installation is in the reverse order of removal.

NOTE: After installation, check Speed Sensor signal.