Front

Front Speed Sensor Components:

REMOVAL

Disconnect Speed Sensor Connector:

1. Disconnect Speed Sensor connector.
(a) Remove the fender liner.
(b) Disconnect the Speed Sensor connector.
2. Remove Speed Sensor.

Remove Clamp Bolts:

(a) Remove the 3 clamp bolts holding the sensor harness to the body and Shock Absorber.
Torque: 5 Nm (44 inch lbs.)

Speed Sensor Installation Bolt:

(b) Remove the Speed Sensor installation bolt from the Steering Knuckle.
Torque: 8 Nm (71 inch lbs.)
(c) Remove the clamp and Speed Sensor.

NOTE: Make sure that:
- There are no foreign objects on the sensor or the part of the knuckle to which the sensor is to be installed.
- The sensor is installed flat against the knuckle when you tighten the bolt.

INSTALLATION
Installation is in the reverse order of removal.

NOTE: After installation, check Speed Sensor signal.