Sliding Roof (TMM Made)

SLIDING ROOF REMOVAL






1. REMOVE ROOF HEADLINING

2. REMOVE SIDE GARNISHES

INSTALLATION HINT: Soak the garnishes in water to soften them before assembly.

3. REMOVE GLASS PANEL ASSEMBLY

Remove the 4 glass panel adjustment screws.

INSTALLATION HINT: Adjust the height of the glass panel, then tighten the 4 screws.

Pull the glass upward to remove it.






4. REMOVE SLIDING ROOF ASSEMBLY

a. Remove the 4 drain hoses from the sliding roof assembly.

b. Remove the 8 bolts and 4 brackets.

c. Remove the 6 nuts and the sliding roof assembly.

SLIDING ROOF INSTALLATION

Installation is in the reverse order of removal.

NOTICE: Check and adjust the sliding roof after installation.