M/T Torque Data

SERVICE SPECIFICATIONS
Oil Pump Clearance:
Rotor Body:
Standard 0.10-0.16 mm (0.0039-0.0063 inch)
Maximum 0.30 mm (0.0118 inch)
Rotor Tip:
Standard 0.08-0.15 (0.0031-0.0059 inch)
Maximum 0.30 mm (0.0118 inch)
Rotor Side:
Standard 0.03-0.08 mm (0.0012-0.0031 inch)
Maximum 0.15 mm (0.0059 inch)
Control Shaft Cover Oil Seal
Drive In Depth 0-1.0 mm (0-0.039 inch)
Select Inner Lever Slotted Spring Pin:
Drive In Depth 0 +/- 0.5 mm (0 +/-0.020 inch)

TORQUE SPECIFICATIONS
Transaxle To Engine:
17 mm Head 64 Nm (47 ft. lbs.)
14 mm Head A 46 Nm (34 ft. lbs.)
14 mm Head B 37 Nm (27 ft. lbs.)
Transaxle To:
Front Engine Absorber 48 Nm (35 ft. lbs.)
LH Engine Mounting Bracket 64 Nm (47 ft. lbs.)
Flywheel Housing Under Cover 7.8 Nm (69 inch lbs.)
No.2 Selecting Bellcrank With:
Selecting Bellcrank Support 20 Nm (14 ft. lbs.)
Straight Screw Plug 25 Nm (18 ft. lbs.)
Straight Screw Plug (Reverse Restrict Pin) 13 Nm (108 inch lbs.)
Reverse Idler Gear Shaft Lock Bolt 29 Nm (22 ft. lbs.)
Transmission Oil Pump Case To:
Oil Pump Cover 10 Nm (96 inch lbs.)
Transmission Oil Cooler Sub-Assembly To:
Elbow 34 Nm (25 ft. lbs.)