Starter Drive/Bendix: Testing and Inspection

Clutch and Gears
1. INSPECT GEAR TEETH
Check the gear teeth on the pinion gear, idler gear and clutch assembly for wear or damage.

If damaged, replace the gear or clutch assembly.

If damaged, also check the drive plate ring gear for wear or damage.







2. INSPECT CLUTCH PINION GEAR
Hold the starter clutch and rotate the pin ion gear counterclockwise. and check that it turns freely. Try to rotate the pinion gear clockwise and check that it locks.

3. IF NECESSARY, REPLACE CLUTCH ASSEMBLY
Service and Repair