Daytime Running Lamp Relay: Testing and Inspection

D.R.L. SYSTEM INSPECTION

Terminal Identification:

1. INSPECT D.R.L. MAIN RELAY CIRCUIT
Disconnect the connector from relay and inspect to connector on wire harness side. as shown.

If the circuit is as specified, try replacing the relay with new one. If the circuit is not as specified. inspect the circuit connected to other parts.










2. INSPECT D.R.L. NO.2 RELAY CIRCUIT
If continuity is not as specified, replace the relays.










3. INSPECT D.R.L. NO.3 RELAY CIRCUIT
If continuity is not as specified. replace the relays.










4. INSPECT D.R.L. NO.4 RELAY CIRCUIT
If continuity is not as specified, replace the relays.