Initial Inspection and Diagnostic Overview

ROOM LIGHT ASSEMBLY INSPECTION







w/ Sliding Roof
INSPECT ROOM LIGHT ASSEMBLY CONTINUITY
1. Disconnect the connector from room light assembly.
2. Turn the room light switch ON, check that there is continuity between terminal 2 and body ground.







3. Turn the room light switch DOOR, check that there is continuity between terminal 1 and 2.

If operation is not as specified, replace the switch.







w/o Sliding Roof
INSPECT ROOM LIGHT ASSEMBLY CONTINUITY
1. Disconnect the connector from room light assembly.
2. Turn the room light switch ON, check that there is continuity between terminal 2 and body ground.







3. Turn the room light switch DOOR, check that there is continuity between terminal 1 and 2.

If operation is not as specified, replace the switch.