Impact Sensor: Service and Repair

1. Disarm SRS as outlined under Air Bag System Disarming and Arming.
2. Remove console box, center cluster and lower center finish panels, and rear air duct No. 3, Figs.69 and 70.

Fig. 69 Air Bag Sensor Assembly Replacement:

Fig. 70 Air Bag Sensor Assembly Replacement:

3. Remove electrical connector.
4. Remove air bag sensor assembly screws with suitable Torx wrench and assembly.
5. Reverse procedure to install and tighten mounting screws to specifications, then arm SRS as outlined under Air Bag System Disarming and Arming.