Crankshaft Position Sensor: Testing and Inspection

CRANKSHAFT POSITION SENSOR INSPECTION

NOTICE: "Cold" and "Hot" in the following sentences express the temperature of the sensors themselves.
"Cold" is from -10°C (14°F) to 50°C (122°F) and
"Hot" is from 50°C (122°F) to 100°C (212°F).

1. Remove no.2 air tube for CAC
2. Disconnect crankshaft position sensor connector.
3. Inspect crankshaft position sensor resistance.





- Using an ohmmeter, measure the resistance between terminals.

Resistance:
Cold
835 - 1,400 Ohms
Hot
1,060 - 1,645 Ohms

- If the resistance is not as specified, replace the crankshaft position sensor.
4. Reconnect crankshaft position sensor connector.
5. Reinstall no.2 air tube for CAC