Crankshaft Position Sensor: Service and Repair

COMPONENTS FOR REMOVAL AND INSTALLATION

CRANKSHAFT POSITION SENSOR REMOVAL

1. Remove generator.





2. Disconnect crankshaft position sensor connector.
- Disconnect the sensor connector from the bracket.
- Disconnect the sensor connector from the wiring connector.
3. Remove crankshaft position sensor.
- Disconnect the wire clamp from the cylinder block.





- Remove the bolt and crankshaft position sensor.

Torque: 8.8 N.m (90 kgf.cm, 78 in..lbf)

CRANKSHAFT POSITION SENSOR INSTALLATION

INSTALLATION HINT: Installation is in the reverse order of removal.