Camshaft Position Sensor: Service and Repair

COMPONENTS FOR REMOVAL AND INSTALLATION

CAMSHAFT POSITION SENSOR REMOVAL

1. Disconnect IAC valve connector.
2. Disconnect air hose from IAC valve.
3. Remove engine hanger.





- Remove the 2 bolts, ground strap and engine hanger.

Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)

4. Disconnect camshaft position sensor connectors.
5. Remove camshaft position sensors.
- Remove the 4 bolts, 2 camshaft position sensors and 2 gaskets.

Torque: 8.8 N.m (90 kgf.cm, 78 in..lbf)

CAMSHAFT POSITION SENSOR INSTALLATION

INSTALLATION HINT: Installation is in the reverse order of removal.