Intermediate Shaft
INTERMEDIATE SHAFTComponents
Intermediate Shaft Disassembly
1. REMOVE INTERMEDIATE SHAFT FRONT BEARING
Using SST, remove the front bearing snap ring. SST 09950-20017
2. REMOVE INTERMEDIATE REAR BEARING
Using SST, remove the rear bearing.
SST 09950-20017
Intermediate Shaft Assembly
1. INSTALL INTERMEDIATE SHAFT FRONT BEARING
a. Using SST and press, press in a new bearing.
SST 09350-32014 (0935-32120)
b. Check that the distance from the gear flange end to the intermediate shaft end is 11 5.8mm (4.559 inch).
2. INSTALL INTERMEDIATE SHAFT REAR BEARING
Using SST and press, press in a new bearing.
SST 09350-32014 (09351-32150)