Center Airbag Sensor

1. Disarm SRS as outlined under Air Bag System Disarming and Arming.
2. On 1993-95 models, remove console box, lower No. 1 and No. 2 finish panels, radio and lower center finish panel, Fig. 63.

Fig. 63 Air Bag Sensor Assembly Replacement:

3. On 1996 models, remove console box and lower center finish panel, Fig. 64.

Fig. 64 Air Bag Sensor Assembly Replacement:

4. On all models, remove air bag sensor assembly electrical connector.
5. Loosen assembly screws with suitable Torx wrench and remove assembly.
6. Reverse procedure to install and tighten mounting screws to specifications.