Crankshaft Position Sensor: Service and Repair

COMPONENTS FOR REMOVAL AND INSTALLATION








CRANKSHAFT POSITION SENSOR REMOVAL
1. DISCONNECT CRANKSHAFT POSITION SENSOR CONNECTOR AND CLAMP
2. REMOVE RH ENGINE UNDER COVER
3. REMOVE TIMING BELT COVERS

(See steps 1 to 11 in timing belt removal in Engine Mechanical)

4. REMOVE CRANKSHAFT POSITION SENSOR
- Remove the bolt and disconnect the crankshaft position sensor.

Torque: 8 N.m (80 kgf.cm, 69 in..lbf)

CRANKSHAFT POSITION SENSOR INSTALLATION

INSTALLATION HINT: Installation is In the reverse order of removal.