Catalytic Converter: Service and Repair

TWC REPLACEMENT
1. REMOVE TWC
- Jack up the vehicle.
- Check that the converter is cool.
- Remove the 4 bolts, support bracket and 2 nuts at the front and rear of the converter.
- Remove the converter and 2 gaskets.
2. REINSTALL CONVERTER
- Install the converter and 2 new gaskets with the 4 bolts, 2 nuts and support bracket.
- Tighten the bolts and nuts.

Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)