Initial Inspection and Diagnostic Overview

REPLACE TRANSAXLE FLUID





- Using a 10 mm hexagon wrench, remove the drain plug and drain the fluid.
- Reinstall the drain plug securely.
- With the engine OFF, add new fluid through the oil filler pipe.

Fluid type: ATF DEXRON II

Capacity:
Drain and refill: 2.5 liters (2.6 US qts, 2.2 Imp. qts)

- Start the engine and shift the shift lever into all positions from P to L position and then shift into P position.





- With the engine idling, check the fluid level. Add fluid up to the COOL level on the dipstick.





- Check the fluid level at the normal operating temperature 70 - 80°C (158 - 176°F) and add as necessary.

NOTICE: Do not overfill.