Throttle Position Sensor: Adjustments

THROTTLE POSITION SENSOR ADJUSTMENT





- Loosen the 2 set screws of the throttle position sensor.





- Apply vacuum to the throttle opener.
- Insert a 0.70 mm (0.028 in.) feeler gauge between the throttle stop screw and stop lever.
- Connect the test probe of an ohmmeter to the terminals IDL and E2 of the throttle position sensor.





- Gradually turn the throttle position sensor clockwise until the ohmmeter deflects, and secure it with the 2 set screws.








- Recheck the continuity between terminals IDL and E2.