Manual Shifting Test

MANUAL SHIFTING TEST

HINT: With this test, it can be determined whether the trouble is within the electrical circuit or is a mechanical problem in the transaxle.





1. DISCONNECT SOLENOID WIRE
2. INSPECT MANUAL DRIVING OPERATION





- Check that the shift and gear positions correspond with the table above.

HINT: If the positions (L, 2 and D position) are difficult to distinguish, do the following road test.

- While driving, shift through the L, 2 and D positions. Check that the gear change corresponds to the shift position.
- If any abnormality is found in the above test, the problem is in the transaxle itself.
3. CONNECT SOLENOID WIRE
4. CANCEL OUT DTC