Disassembly and Reassembly

HINT: Screw shapes and size are indicated in the table above. The code ((A) - (L)) correspond to those indicated in the image above.

DISASSEMBLY

1. REMOVE THESE PARTS:
(a) Defroster nozzle garnish
(b) Defroster nozzle
(c) No.1 and No.2 side defroster nozzle duct
(d) Center bracket
(e) No.1 heater to register duct
(f) No.1 mounting bracket
(g) Inpane J/B and bracket
(h) Pin
(i) No.1 side defroster nozzle
(j) No.2 register





2. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
(a) Remove the 3 bolts and 4 nuts, and remove front passenger airbag assembly.
(b) Remove the 2 screws and the airbag door.

CAUTION:
- Do not store the front passenger airbag assembly with the airbag deployment direction facing down.
- Never disassemble the front passenger airbag assem bly.

ASSEMBLY NOTICE:
- When installing the instrument panel, take care that the airbag wire harness does not interfere with other parts and is not pinched between other parts.
- When installing the instrument panel box, carefully pull out the airbag wire harness from the glove compartment upper hole.

3. REMOVE THESE PARTS:
(a) No.3 heater to register duct
(b) No.2 radio mounting bracket

4. REMOVE INSTRUMENT PANEL WIRE HARNESS

ASSEMBLY
Assembly is in the reverse order of disassembly.