Restraint Systems

DTC CHART





If a malfunction code is displayed during the DTC check, check the circuit listed for that code in the table below.

HINT:
- When the SRS warning light remains lit up and the DTC in the normal code, this means a source voltage drop. This malfunction is not stored in memory by the center airbag sensor assembly and if the power source voltage returns to normal, after approx. 10 seconds the SRS warning light will automatically go out.
- When 2 or more codes are indicated, the lowest numbered code will appear first.
- If a code not listed on the chart is displayed, then the center airbag sensor assembly is faulty.