Component Tests and General Diagnostics

INSPECT SLIDING ROOF GLASS ALIGNMENT




(a) Start the engine and check the operation time of the sliding roof.

Operation time: Approx. 6 seconds.

(b) Check for abnormal noise or binding during operation.
(c) With the sliding roof fully closed, check for water leakage.
(d) Check for a difference in level between the sliding roof weatherstrip and roof panel.

Front end: 1 ± 1 mm (O.039 ± 0.039 in.)
Rear end: 0 ± 1 mm (0 ± O.039 in.)

If the sliding roof does not operate:





(e) Remove the control switch cover.
(f) Remove the large screw inside.

NOTICE: Be careful not to lose the spring washer or shim.

(g) Manually operate the moon roof by inserting a special crank-shaped screwdriver into the hole and turning the drive shaft.