Component Tests and General Diagnostics

CRANKSHAFT POSITION SENSOR INSPECTION

NOTICE: "Cold" and "Hot" in the following sentences express the temperature of the sensor itself.
"Cold" is from -10°C (14°F) to 50 °C (122°F).
"Hot" is from 50°C (122°F) to 100°C (212 °F).




1. DISCONNECT CRANKSHAFT POSITION SENSOR CONNECTOR FROM GENERATOR DRIVE BELT ADJUSTING BAR
2. INSPECT CRANKSHAFT POSITION SENSOR RESISTANCE



- Using an ohmmeter, measure the resistance between terminals.

Resistance:
- Cold: 985 - 1,600 Ohms
- Hot: 1,265 - 1,890 Ohms

- If the resistance is not as specified, replace the crankshaft position sensor.
3. RECONNECT CRANKSHAFT POSITION SENSOR CONNECTOR