Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Crankshaft Position Sensor: Service and Repair

Components For Crankshaft Position Sensor Removal And Replacement:






CAMSHAFT POSITION SENSOR REMOVAL AND INSTALLATION



1. DISCONNECT CRANKSHAFT POSITION SENSOR CONNECTOR AND CLAMP.
2. REMOVE RH ENGINE UNDER COVER.
3. REMOVE NO.2 TIMING BELT COVER.
4. REMOVE CRANKSHAFT POSITION SENSOR.



- Remove the bolt and disconnect the crankshaft position sensor.

Torque: 8 Nm (80 kgf.cm, 69 in.lb)

- Installation is in the reverse order of removal.