Sub Oxygen Sensor Inspection
INSPECT HEATER RESISTANCE OF SUB HEATED OXYGEN SENSORSub Heated Oxygen Sensor Location:
- Remove the passenger's seat.
- Take out the console box side of the floor carpet.
- Disconnect the oxygen sensor connector.
- Using an ohmmeter, measure the resistance between the terminals +B and HT.
Resistance: At 20°C (68°F): 11 - 16 Ohms
- If the resistance is not as specified, replace the sensor.
Torque: 44 Nm (32 ft.lb)
- Reconnect the oxygen sensor connector.
- Reinstall the floor carpet.
- Reinstall the passenger's seat.