Vehicle Speed Sensor: Service and Repair

VEHICLE SPEED SENSOR NO. 1 REPLACEMENT

1. Disconnect NO.1 vehicle speed sensor connector.



2. Remove the bolt and pry out vehicle speed sensor.






VEHICLE SPEED SENSOR NO.2 REPLACEMENT (w/Speedometer Driven Gear)







1. Disconnect NO.2 vehicle speed sensor connector.



2. Remove NO.2 vehicle speed sensor and sensor rotor.

(a) Remove the bolt, retaining plate and pull out NO.2 vehicle speed sensor.

(b) Remove the 0-ring from the NO.2 vehicle speed sensor.

(c) Coat a new 0-ring with ATF and install it to the vehicle speed sensor.

3. Install vehicle speed sensor assembly.

Torque: 5.4 Nm(55kgf-cm, 48 in.lbf)

Note: Intsallation is the reverse order of removal.