Ignition Coil: Service and Repair

1. REMOVE V-BANK COVER.



(a) Using a 5 mm hexagon wrench, remove the 2 cap nuts.
(b) Disconnect the 2 clips, remove the V-bank cover.
INSTALLATION HINT: For fixing the V-bank cover, push on the cover until a "click" is felt.

2. REMOVE IGNITION COILS.



(a) Disconnect the 6 connectors from the RH and LH cylinder heads.
(b) Remove the 6 bolts and 6 ignition coils from the RH and LH cylinder heads.

Torque: 8 Nm (8O kgf.cm; 69 in.lb)

- Installation is in the reverse order of removal.