Off-Vehicle Inspection

IDLE AIR CONTROL (IAC) VALVE INSPECTION



1. REMOVE THROTTLE BODY.

2. REMOVE IAC VALVE.



- Remove the 4 screws, IAC valve and gasket.

3. INSPECT IAC VALVE OPERATION.



- Connect the positive (+) lead from the battery to terminal +B and negative (-) lead to terminal RSC, and check that the valve is closed.




- Connect the positive (+) lead from the battery to terminal +B and negative (-) lead to terminal RSO, and check that the valve is open.

- If operation is not as specified, replace the IAC valve.