Camshaft Position Sensor: Service and Repair
REMOVAL1. Disconnect negative (-) terminal cable from battery.
CAUTION: Work must not be started for at least 90 seconds from the time the Ignition switch is turned to the "LOCK" position and the negative (-) terminal cable is disconnected from the battery.
2. Remove Camshaft Position Sensor.
- Disconnect the Camshaft Position Sensor connector.
- Remove the 2 bolts and Camshaft Position Sensor.
INSTALLATION
1. Install Camshaft Position Sensor with the 2 bolts.
Torque: 8 Nm (69 in lb)
2. Reconnect the Camshaft Position Sensor connector.
3. Reinstall the negative (-) terminal cable to battery.